Pump industry solution

Where you are now :HOME > SOLUTION

HOME > SOLUTION > Pump industry solution

Pump industry solution

Processing pump industry parts,HALNN superhard have corresponding cubic boron nitride inserts (CBN inserts) of BN-K1, the advantage of BN-K1 CBN insert to processing pump parts:

Belong to the non-metal adhesive cubic boron nitride insert, not only high hardness, abrasion resistance and impact resistance most optimal, but also large number to processing  pump parts without burst broadsword. Specific processing scheme as follows:

1. Halnn superhard cubic boron nitride insert BN - K1 processing pump industry parts and pump body cases ( as below pictured).

 泵1.jpg            

Processing Materials: high chromium white cast iron Cr26;
Hardness: HRC60
Processing parts: industrial pump pump body;
Model number: BN-K1;
Cutting parameters: ap=3.5mm, Fr=0.1mm/r, Vc=75m/min;
Processing type: dry cutting.
Processing effect:Compared to ceramic inserts (below) :When cutting speed of Halnn superhard cubic boron nitride insert BN - K1 model number is 2 times of ceramic insert, machine feed quantity 42% more than ceramic insert,the life of single blade of Halnn superhard cutting tool BN - K1 model number is 7.5 times than ceramic insert.

 

 

Cutting tools materials Cutting speed Feed Single blade life
Halnn BN-K1 75m/min 0.1mm/r 85pcs/edge
A certain brand of ceramic inserts 35m/min 0.07mm/r 10pcs/edge
 

2.HALNN superhard cubic boron nitride insert BN - K1processing pump industry parts impeller outer circle cases ( as below pictured).
 

 pump                  

Processing Materials: high chromium white cast iron Cr26; 

Hardness: HRC60

Processing parts:Slurry pump impeller;

Model number: BN-K1;

Cutting parameters: ap=5mm,f=0.1mm/r,vc=75m/min;

Processing type:dry cutting.

Processing effect:Compared to ceramic insert (below) :In the case of Halnn superhard cubic boron nitride insert BN-K1 model number cutting speed is higher than the ceramic insert 2 times, the life of single insert of Halnn superhard cutting tool BN - K1 model number is 7.5 times than ceramic insert.

 

Cutting tools materials

Cutting speed

Single blade life

 The final failure forms

Halnn BN-K1

75m/min

7pcs/edge

 Normal wear

A certain brand of ceramic inserts

35m/min

1pcs/edge

Chipping

 

 

 

Any questions ,please email to us halnntools@gmail.com ,skype:cbn_inserts_angels

 

 

Zhengzhou halnn superhard materials Co., Ltd     TEL:+86 371 67981990 Real Time Web Analytics